Design Master® Colortool Spray - Blush | 781, 12 oz
Design Master® ColorTool Spray is formulated for fresh flowers, offering smooth, even coverage with an opaque to semi-opaque satin finish. Fast-drying and versatile, it’s ideal for multi-surface use while remaining safe for use on petals and foliage.
- Coverage: Varies with use and desired opacity. Single Coat: up to 16 sq ft / 1.5 m². Full Opacity: 6-8 sq ft / 0.6-.75 m².
- Application Conditions: Use at room temperature (70 °F / 21 °C), low humidity and a well-ventilated area.
- Dry Time: 30-45 seconds between light coats on fresh flowers. 5 minutes dry to handle on hard surfaces with best durability after 18-24 hours.
- Recoat Window: Recoat at any time.
- Cleanup: Use lacquer thinner or acetone on non-perishable surfaces.
- Net Weight: 12 oz / 340 g
Looking for this shade? Find it at your local wholesaler.
Application Instructions
- Shake the can well for 1 minute after hearing the mixing ball rattle.
- Align the spray opening with the black dot on the can rim.
- Spray in a well-ventilated area.
- Make sure surface is clean and dry.
- Ultra-fine spray allows for versatile application techniques — such as color misting, blending, creative effects, or achieving a dripless, even finish.
- 1 coat creates a soft, translucent wash of color.
- 2–3 light coats enrich the color and provide full surface coverage.
- For fresh flowers, spray from a distance of 15–18 in / 38–45 cm. Best results occur when blossoms are in good condition and at room temperature.
- For hard surfaces, spray from a distance of 12–15 in / 30–38 cm using steady, consistent strokes parallel to the surface. Start at the base and move upward, rotating the object Slightly overlap each stroke to prevent uneven coverage and ensure a smooth, even finish. Begin and end each stroke off of the object.
- For Styrofoam™ brand foam, spray 15–18 in / 38–45 cm away using light, even coats. Allow to dry between coats and build up coverage gradually. Avoid over-wetting the surface to prevent melting.
- For vinyl surfaces, apply a basecoat of Super Surface Sealer to ensure compatibility with spray color.
- On prefinished or unknown coatings, test spray a small, hidden area first to confirm adhesion and desired results.
- Recommended for indoor projects. Colors are not UV resistant and may fade if regularly exposed to direct sunlight.
Design Master® Colortool Spray - Blush | 781, 12 oz
Sale price$0.00
Choose options